Ion-science Tiger Instrukcja Użytkownika Pobierz pdf (Strona 16)

TIGER MANUAL Ion Science Ltd

Page 16 of 46

Unrivalled Detection. www.ionscience.com

Using your Tiger

Sound

The sound options are presented as set up in TIGER PC. Use the Down key to select either keypad beep,

alarm sound, crescendo or percentage volume. Press Enter to turn selection on or off. For percentage

volume, press Enter again to confirm selection. The frame will flash. Use Up and Down keys to change the

percentage volume and press Enter to confirm the chosen value. Press Esc twice to return to the main

screen.

Calibration

Only two options are presented: Factory Calibration and Custom Calibration. Select the preferred option

with the Up and Down keys and confirm with Enter. Whichever calibration standard is selected, the TIGER

will operate against that calibration. Readings taken against unsatisfactory calibrations may be unreliable.

Factory Calibration Not for operator use.

Return to Ion Science Ltd or your distributor for calibration. (see the ‘Maintenance’ section of the

manual page 37)

Custom Calibration see the ’Maintenance’ section of the manual page 37.

Alarms Upper and Lower alarm settings are displayed. Select the subject alarm using the

Up and Down keys and press Enter. The arrow(s) on the chosen alarm will flash. Adjust the level using the

Up and Down keys and press Enter. Repeat, if necessary for the other alarm. Press Esc twice to return to

the main screen.

Note: The Lower alarm setting must never be greater than the Higher alarm.

Units Select the available units by using the Up and Down keys and then press Enter.

Lamp Select the lamp type by pressing the Up and Down keys and then press Enter

Information

Pressing the Information soft key allows access to a number of other information screens. Use the Down

key to scroll through the screens. Press Esc to return to the main screen:

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 45 46

Brak uwag

Ion-science Tiger Instrukcja Użytkownika Strona 16